Single Speed Confined Space Fan EBS-16

Single Speed Confined Space Fan EBS-16 Firefighting Equipment Tempest Blowers Back View
Single Speed Confined Space Fan EBS-16 Firefighting Equipment Tempest Blowers Side View

The Tempest EBS-16, or Box Fan, is popular for all forms of confined space ventilation.

    • Negative Pressure Ventilation (NPV)
      Negative Pressure Ventilation (NPV), as opposed to Positive Pressure Ventilation (PPV), is the method of using a fan to suck out unwanted particulates rather than blowing them out. The Tempest EBS-16’s size and design is most effective and efficient at NPV; although, PPV may still be utilized in some circumstances.
    • Light Weight
      At 47 lbs, the Tempest EBS-16 is one of the lightest weight ventilation units available. It’s reduced dimensions and frame design allow users to easily carry it to and from the work site.
    • Single Speed AOC Motor
      The Tempest EBS-16 comes standard with a single speed electric AOC motor with an output of 0.3 HP. This specific motor is matched perfectly with the fan blade’s size and pitch to produce the most effective air movement possible.
    • Formed & Welded Roll Cage Frame
      Not an ounce of Tempest’s well known reliability and durability that comes standard on every fan was sacrificed to achieve this unit’s small stature and light weight. The frame is made entirely of steel; all molded, formed and welded into a sturdy roll-cage design. Like every Tempest, it’s built to last on the job site.
    • Compact Size
      Originally intended for confined space ventilation, the EBS-16 is small enough to hang, sit or fit in a wide array of tight spaces. Whether space is a factor for you for in storing or using ventilation, our box fan will suit you perfectly.

FEATURES

  • Single Speed Confined Space Fan EBS-16 Firefighting Equipment Tempest Blowers Front View
  • Single Speed Confined Space Fan EBS-16 Firefighting Equipment Tempest Blowers Side View
  • Single Speed Confined Space Fan EBS-16 Firefighting Equipment Tempest Blowers Back View

Electric-Powered Smoke Ejector Fan  – EBS-16

The Tempest Electric-Powered Smoke Ejector – EBS-16, is popular for all forms of confined space ventilation. It’s light and small enough to ventilate tight areas but still built to Tempest’s standard of long lasting durability and reliability. Plug it in and remove the smoke/fumes/particulates out from almost any location.

Data Sheet

TYPE Confined Space Fan, Hazardous Locations
BLADE 16″ Diameter Assembly Made Up of 6, Air Flex Fiberglass Reinforced Polyamide Blades
FRAME Formed and Welded Sheet Metal Construction with Powder-Coat Finish
SHROUD Integral Component of Frame
BUSHING Keyed Shaft and Set or Cap Screws
GRILLE Continuous Circular Wound External-Weld Steel Wire w/ 4 Tie Points for Additional Safety
Steel is Zinc-Plated with a Clear Chromate Finish
MOTOR/DRIVE 0.3 HP or 1.5 HP Single Speed Electric AOC Motorn
Designed to run on 15 AMP Circuit
Actual Draw Approx. 6.3 AMP (0.3 HP) or 14.2 (1.5 HP)
EXPLOSION PROOF MOTOR OPTION Rated for Class I (Group C & D) and Class II (Group F & G) Environments
Part No. Model No. Dia. HP CFM Dimensions (W” x D” x H”) Weight
913-1000 EB-16-S-0.3 16″ 0.3 3,200 18.75″ x 14.25″ x 19.50″ 47 lbs.
913-1001 EB-16-S-0.3-EP 16″ 0.3 3,200 18.75″ x 14.25″ x 19.50″ 52 lbs.
913-1010 EB-16-S-1.5 16″ 1.5 11,804 18.75″ x 14.25″ x 19.50″ 59 lbs.

Downloads

Cutsheet PDF Product Manual PDF