Single - Speed Electric Power Blower

Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.

Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.

Exclusive frame design makes it convenient to lift, carry and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research and experience to create the most ergonomic platform possible.

No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°.

The Single Speed’s 1.5 and 1.0 HP motors are extremely simple to operate with only a single switch used to turn the unit ON or OFF. All models are GFCI compatible and will run on any 15 amp circuit without tripping the breaker. Every Single Speed positive pressure ventilation fan provides impressive CFM capable of creating positive pressure ventilation.

One of the benefits of a single speed electric motor is its ability to be readily built into an explosion proof housing. The Single Speed EP motor option is rated to operate safely in Class I, Groups C & D and Class II, Groups F & G environments. When dealing with potentially flammable environment, EP is a must. Optional explosion proof ON/OFF switch also available.

16″ Single Speed Explosion Proof Part No. 910-1201
18″ Single Speed Explosion Proof Part No. 910-1221
21″ Single Speed Explosion Proof Part No. 910-1241
24″ Single Speed Explosion Proof Part No. 910-1261

NOTE: Explosion Proof options do not affect Power Blower size or performance.

Extra wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The PPV fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of the fan while in operation is eliminated. Risk of getting clothing in the positive pressure fan’s blades while kneeling to set brake levers is eliminated. 16″ models are only available with 6″ non-pneumatic tires.

By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind.

The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.

No levers to set or knobs to tighten when setting the angle for PPV. Foot operated adjustment is quick, easy and secure. Dual step allows for adjustment with either foot. Four back and one forward tilt position.

Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards.

Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use.