Leader Fans

Showing all 14 results

• 

  MT236 NEO- Direct-Drive Honda 4.8hp Gas-Driven Fan

  Best seller of LEADER gas-driven fans, MT236 has the best price/performance/size ratio!

  • NEO TECHNOLOGY
    MT236 gas-driven fan has a performance superior to the competition in its class. Equipped with NEO technology, it generates an ultra-powerful oval air jet thanks to an optimal combination:

    • Highly resistant propeller adapted to the power of the engine
    • Red double-layer monobloc shroud made of reinforced high-density polyethylene
    • High-tech composite grille
  • CERTIFIED PERFORMANCE
    The AMCA and open air flow rates of LEADER fans are all tested and certified by independent laboratories.
  • POSITIONING FROM 3 ft TO 20 ft
    MT236 can be positioned from 3 ft To 20 ft in front of a door without loss of power. This allows firefighters to have more space to manoeuvre and reduces the noise level inside the ventilated building.
  • AUTOMATIC TILT AND STABILISER PROP
    When raised, the lifting handle automatically positions the fan at its optimal angle of tilt. The ability to withdraw the unit and tilt it to its maximum angle makes ventilation possible in these situations: Raised doors and windows, entrance steps, landings, etc. In addition, it is equipped with a stabiliser prop at the rear, which also allows the fan to be tilted at -10° for downward ventilation (ventilation of semi-basements, for example).

  Find A Dealer
  View Product
• 

  Battery-Powered Fan B215-Li – 10,235 cfm AMCA

  The swappable battery-operated fan from Leader is powerful and lightweight for self-contained operation.

  • • • 35-Minute Autonomous Run-Time
        The B215-Li's rechargeable battery in just 75 minutes gives it an autonomy of 35 minutes at full speed.
      • 10,235 CFM Air Flow
        The B1215-Li produces a very powerful airflow tested to AMCA standards.
      • NEO Technology
        Developed by LEADER is the optimal GRILLE / PROPELLER / VOLUTE combination allowing LEADER fans to obtain up to 20% additional flow for unmatched power in their category. NEO technology therefore creates an ovalized jet that perfectly matches the shape of the entrance door to the room to be ventilated.
      • Removable Battery
        Its swappable battery can be replaced in seconds a replacement battery, allowing you to start a new intervention very quickly, losing no time.
      • Only 49 lbs
        The welded tubular aluminum frame design makes it easy to roll or lift.
      • Simple
        • Single Speed motor rated at IP55
        • NEO Technology design
        • For blowing or extraction through ducts
        • Small Footprint 21.6”L x 20.7”H x 19.1”D

  Find A Dealer
  View Product
• 

  EVG230 NEO – Variable-Speed Drive Electric Fan

  • A very concentrated and ultra-powerful jet of air due to an optimal combination of:
    • A high-strength propeller matched to the power of the engine
    • A red double-layer monobloc shroud made of reinforced high-density polyethylene
    • A high-tech composite grille
  • Positioning from 3 ft to 19.7 ft in front of a door without loss of power for:
    • more space to move about
    • less noise inside the building
  • Additional Features
    • Automatic optimal +10° tilt when handle raised
    • Precise tilt adjustment from +10° to +20° for optimization of direction of air stream up entrance steps
    • Protective frame with grey epoxy coating
    • Stable & easy to handle with large rear wheels
    • Compact for easy storage in vehicle trunks

  Find A Dealer
  View Product
• 

  EDS230.2 NEO – Direct Start Electric Fan

  • A very concentrated and ultra-powerful jet of air due to an optimal combination of:
    • A high-strength propeller matched to the power of the engine
    • A red double-layer monobloc shroud made of reinforced high-density polyethylene
    • A high-tech composite grille
  • Positioning from 3 ft to 19.7 ft in front of a door without loss of power for:
    • more space to move about
    • less noise inside the building
  • Additional Features
    • Automatic optimal +10° tilt when handle raised
    • Precise tilt adjustment from +10° to +20° for optimization of direction of air stream up entrance steps
    • Protective frame with grey epoxy coating
    • Stable & easy to handle with large rear wheels
    • Compact for easy storage in vehicle trunks

  Find A Dealer
  View Product
• 

  MT296 – Direct-Drive Briggs & Stratton 16hp Gas-Driven Fan

  The most powerful gas-driven fan in its class (22.4 in propeller), MT296 achieves a flow rate of 56,505 cfm Open Air.

  • EASY POW'AIR TECHNOLOGY
    EASY POW'AIR technology allows ventilators to generate a powerful and concentrated air jet when positioning the ventilator at a distance of 0.91 to 6.09 m from the opening. This frees up space for intervention teams. In addition, they are equipped with an automatic tilting system that allows ventilation of entrance steps, landings, raised doors and windows, etc.
  • THE MOST POWERFUL IN ITS CLASS
    Equipped with a 16 HP twin-cylinder engine and with a flow rate of 56,505 cfm Open Air, MT296 gas-driven fan is the most powerful in its class!
  • A WIDE RANGE OF OPTIONS AVAILABLE
    MT296 gas-driven fan has a wide range of options available: Spiral duct, mister, exhaust extension, protective cover and -10° prop that allows negative tilt for basement ventilation. This fan can also be equipped with a high expansion foam adapter.

  Find A Dealer
  View Product
• 

  Large-flow ventilator EASY 4000 trailer-mounted – 234,430 cfm Open Air

  LFV ideal for ventilation of very large volumes like tunnels, industrial sites, airport halls, etc.

  • VERY LARGE FLOW
    EASY 4000 large-flow ventilator is the most efficient ventilator in LEADER range. With a flow rate of 234,430 cfm Open Air, it allows smoke removal and cooling of very large volumes (tunnels, industrial sites, airport halls, etc.). EASY 4000 is equipped with a BMW engine with direct transmission between engine and propeller (no timing belt).
  • ADJUSTABLE TILT
    EASY 4000 large-flow ventilator is equipped with a Large Format shroud of 47.2" diameter with adjustable tilt from -10° to +20° controlled from the control panel.
  • Optional 23.6" and 47.2" lift system
    EASY 4000 can be mounted on an elevation platform of 23.6 in or 47.2 in.
  • MANY OPTIONS AVAILABLE
    EASY 4000 large-flow ventilator can be equipped with many options such as LED headlight, exhaust extension, blowing or suction ducts, and manual 360° rotation system.

  Find A Dealer
  View Product
• 

  Large-flow ventilator EASY 4000 on Skid – 234,430 cfm Open Air

  Perfect for ventilation of very large volumes like tunnels, industrial sites, airport halls, etc.

  • LARGE FLOW
    EASY 4000 large-flow ventilator is the most efficient ventilator in LEADER range. With a flow rate of 234,430 cfm Open Air, it allows smoke removal and cooling of very large volumes (tunnels, industrial sites, airport halls, etc.).
  • ADJUSTABLE TILT
    EASY 4000 large-flow ventilator is equipped with a Large Format shroud of 47.2" diameter with adjustable tilt from -10° to +20° controlled from the control panel.
  • Optional 23.6 in and 47.2 in lift system
    EASY 4000 can be mounted on an elevation platform of 23.7 in or 47.2 in.
  • MANY OPTIONS AVAILABLE
    EASY 4000 large-flow ventilator can be equipped with many options such as LED headlight, exhaust extension, blowing or suction ducts, and manual 360° rotation system.

  Find A Dealer
  View Product
• 

  Large-flow ventilator EASY 2000 trailer-mounted – 129,400 cfm Open Air

  It is ideal for ventilation of industrial units, medium/high-rise buildings and underground parking lots.

  • LARGE FLOW
    EASY 2000 large-flow ventilator is the best in its class. With a flow rate of 129,400 cfm Open Air, it allows smoke removal and cooling of large volumes (covered/closed parking lots, warehouses, production lines, exhibition halls, etc.).
  • EASY TO OPERATE BY ONE PERSON
    Thanks to its extremely low weight (less than 716 lbs), EASY 2000 LFV (Large-Flow Ventilator) is very easy to operate by one person.
  • ADAPTABLE TO ALL TYPES OF VEHICLES
    EASY 2000 large-flow ventilator is available in two versions to meet different configurations:

    • On Skid: can be used on a forklift truck, trolley, tracked vehicle or on a vehicle bed (pick-up type)
    • Trailer-mounted
  • MANY OPTIONS AVAILABLE
    EASY 2000 large-flow ventilator can be equipped with many options such as 23 in or 47 in lifting table, LED headlight, exhaust extension, blowing or suction ducts, etc.

  Find A Dealer
  View Product
• 

  Large-flow ventilator EASY 2000 on Skid – 129,400 cfm Open Air

  Compact LFV: ideal for ventilation of industrial units, medium-rise buildings and underground parking lots.

  • LARGE FLOW
    EASY 2000 large-flow ventilator is the best in its class. With a flow rate of 129,400 cfm Open Air, it allows smoke removal and cooling of large volumes (covered/closed parking lots, warehouses, production lines, exhibition halls, etc.).
  • EASY TO OPERATE BY ONE PERSON
    Thanks to its extremely low weight (less than 392.4 lbs.), EASY 2000 Large-Flow ventilator is very easy to operate by one person.
  • ADAPTABLE TO ALL TYPES OF VEHICLES
    EASY 2000 large-flow ventilator is available in two versions to meet different configurations:

    • On Skid: can be used on a forklift truck, trolley, tracked vehicle or on a vehicle bed (pick-up type)
    • Trailer-mounted
  • MANY OPTIONS AVAILABLE
    EASY 2000 large-flow ventilator can be equipped with many options such as 23.6 in or 47.2 in lifting table, LED headlight, exhaust extension, blowing or suction ducts, and manual 360° rotation system.

  Find A Dealer
  View Product
• 

  NEO water-driven fan MH236 – 28,870 cfm Open Air

  With a compact water-driven engine and equipped with an integrated misting system, MH236 generates a flow rate of 28,870 cfm Open Air.

  • WATER-DRIVEN
    Powered by a water-driven engine, MH236 does not generate any exhaust gas and requires no power supply.
  • COMPACT
    Compact, MH236 water-driven fan fits easily in vehicle trunks.
  • INTEGRATED MISTING SYSTEM
    MH236 water-driven fan is equipped with a standard misting system for faster and more efficient air cooling.
  • NEO TECHNOLOGY
    NEO technology is the optimal combination of a highly resistant propeller, a high-tech grille and a reinforced monobloc frame to achieve unmatched performance. NEO oval-shaped jet can limit the loss of efficiency related to the shape of the door.

  Find A Dealer
  View Product
• 

  EDS230 / EVG 230 NEO – Direct Start Electric Fan

  • A very concentrated and ultra-powerful jet of air due to an optimal combination of:
    • A high-strength propeller matched to the power of the engine
    • A red double-layer monobloc shroud made of reinforced high-density polyethylene
    • A high-tech composite grille
  • Positioning from 3 ft to 19.7 ft in front of a door without loss of power for:
    • more space to move about
    • less noise inside the building
  • Additional Features
    • Automatic optimal +10° tilt when handle raised
    • Precise tilt adjustment from +10° to +20° for optimization of direction of air stream up entrance steps
    • Protective frame with grey epoxy coating
    • Stable & easy to handle with large rear wheels
    • Compact for easy storage in vehicle trunks

  Find A Dealer
  View Product
• 

  MT280 – Direct-Drive Honda 13hp Gas-Driven Fan

  A compromise between MT245 and MT296, MT280 is lighter than MT296 and more powerful than MT245.

  • EASY POW'AIR TECHNOLOGY
    The speed and concentrated shape of the EASY POW'AIR jet entrains surrounding air, thereby increasing the fan's flow rate. The force and stability of the jet gives constant and optimal efficiency from 6.5 to 19.6 ft between fan and opening. This creates valuable space for intervention teams working in/around the entrance. In addition, fans with this technology are equipped with automatic tilt.
  • MANY OPTIONS AVAILABLE
    MT280 gas-driven fan can be equipped with many options such as mister, foam adapter, sheath, adapter, exhaust extension and protective cover.

  Find A Dealer
  View Product
• 

  Water-driven fan MH260 – 29,725 cfm Open Air

  With a compact water-driven engine and equipped with an integrated misting system, MH260 generates a flow rate of 29,725 cfm Open Air

  • WATER-DRIVEN
    Powered by a water-driven engine, MH260 does not generate any exhaust gas and requires no power supply.
  • POWERFUL
    Powerful, MH260 water-driven fan generates an open air flow of 29,725 cfm Open Air
  • INTEGRATED MISTING SYSTEM
    MH260 water-driven fan is equipped with a standard misting system for faster and more efficient air cooling.
  • EASY POW'AIR TECHNOLOGY
    EASY POW'AIR technology reinforces the air entrainment effect, specific to turbo-blowers, thus allowing to place the fan at a greater distance from the opening (from 0.9 to 20 m) in order to create valuable space for response teams.

  Find A Dealer
  View Product
• 

  MT245 – Direct-Drive Honda 6.5hp Gas-Driven Fan

  Gas-driven fan MT245 - 30,135 cfm Open Air

  • EASY POW'AIR TECHNOLOGY
    The speed and concentrated shape of the EASY POW'AIR jet entrains surrounding air, thereby increasing the fan's flow rate. The force and stability of the jet gives constant and optimal efficiency from 1.98 to 5.97 m between fan and opening. This creates valuable space for intervention teams working in/around the entrance. In addition, fans with this technology are equipped with automatic tilt.
  • THE LIGHTEST OF ITS CATEGORY
    Equipped with a HONDA GX 200 engine, MT245 petrol-driven fan is the lightest in its class.
  • A WIDE RANGE OF OPTIONS AVAILABLE
    MT245 gas-driven fan has a wide range of options available: Spiral duct, mister, exhaust extension, protective cover and -10° prop that allows negative tilt for basement ventilation. This fan can also be equipped with a high expansion foam adapter.

  Find A Dealer
  View Product