Tempest Fans and Blowers

Showing 1–16 of 23 results

• 

   VS-1.2D Tech Series DEWALT Battery Power Blower w/ folding handle

  The VS-1.2D DEWALT battery-driven blower delivers a level of utility and performance found with no other battery-driven blower with the convenience of DEWALT FLEXVOLT 60V batteries.

  • • 40-Minute Run-Time
      With all 3 DEWALT 60V 12AH Batteries, blower will run for an average of 40 minutes or you can run off of just 1 or 2 batteries.
    • AMCA CERTIFIED 9,614 CFM
      A tapered lightweight steel shroud and uniquely designed composite impeller delivers maximum air volume (CFM), velocity and pressure from the VS-1.2
    • Removable Battery
      1 and up to 3 DEWALT 60V Batteries in succession with 2-hour quick charge.
    • AVAILABLE SHORE POWER
      Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible
    • Only 51 lbs. with 3 Batteries
      The welded tubular aluminum frame design makes it easy to roll or lift. US Patent #.: US 11,333,291 B2 
    • Conversion Kits Available
      Have an older VS-1 or VS-1.2? We have kits that can convert both the original VS-1 or VS-1.2 into DEWALT-Powered Blowers.
    • Other Features
      -Variable Speed motor rated at IP65 -Thin-Vane air straightener grill and composite impeller -LED flow-path lighting positioned low for visibility below the smoke -Tapered lightweight steel shroud maximizes airflow performance -Ergonomic patent-pending frame design with transverse wheels -Small Footprint 22.88″W x 24.4″H x 12.25″D (Half the size of a gas blower) -Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics.

  Find A Dealer
  View Product
• 

   VS-1.3H Tech Series powered by HURST® Jaws of Life® E3™/EWXT™ Batteries

  Tempest VS1.3H Tech Series, powered by 2 removable HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries, delivers power & versatility

  • • 35-Minute Run-Time
      With 2 removable HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries, the blower will run for an average of 35 minutes.
    • 10,887 CFM Tested to AMCA Standards
      A tapered lightweight steel shroud and uniquely designed composite impeller delivers constant air volume (CFM), velocity and pressure from the VS-1.3
    • Removable Battery
      Powered by 2 removable HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries.
    • AVAILABLE SHORE POWER
      Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible
    • Only 50 lbs. with both batteries
      The welded tubular aluminum frame design makes it easy to roll or lift. Increased depth for greater stability and Large 6” wheels for ease of rolling over obstaclesUS Patent #.: US 11,333,291 B2 
    • Other Features
      -Variable Speed motor rated at IP65 -Ultra-Light-air straightener grill and composite impeller -LED flow-path lighting positioned low for visibility below the smoke -Tapered lightweight steel shroud maximizes airflow performance -Ergonomic patent-pending frame design with transverse wheels -Small Footprint 23.75”L x 25”H x 15.25”D (Half the size of a gas blower) -Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics.

  Find A Dealer
  View Product
• 

  VS-1.3M Tech Series powered by MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries

  Tempest VS1.3M Tech Series, powered by 1 and up to 3 removable MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries, delivers power & versatility

  • • 65-Minute Run-Time
      With 1 and up to 3 removable MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries, the blower will run for an average of 65 minutes.
    • Over 10,000 CFM Tested to AMCA Standards
      A tapered lightweight steel shroud and uniquely designed composite impeller delivers constant air volume (CFM), velocity and pressure from the VS-1.3M
    • Removable Batteries
      Powered by 1 and up to 3 removable MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries.
    • AVAILABLE SHORE POWER
      Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible
    • Only 55 lbs. with all 3 batteries
      The welded tubular aluminum frame design makes it easy to roll or lift. Increased depth for greater stability and Large 6” wheels for ease of rolling over obstacles US Patent #.: US 11,333,291 B2 
    • Other Features
      -Variable Speed motor rated at IP65 -Ultra-Light-air straightener grill and composite impeller -LED flow-path lighting positioned low for visibility below the smoke -Tapered lightweight steel shroud maximizes airflow performance -Ergonomic patent-pending frame design with transverse wheels -Small Footprint 23.75”L x 25”H x 15.25”D (Half the size of a gas blower) -Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics.

  Find A Dealer
  View Product
• 

   VS-1.2 Tech Series Battery Power Blower w/ folding handle

  The VS-1.2 battery-driven blower delivers a level of utility and performance found with no other battery-driven blower.

  • 70-Minute Run-Time
    Even at full speed, the Tempest VS-1.2 provides an industry-leading 70 minute run time with fold-down handle
  • 10,887 CFM AMCA Certified Air Flow
    A taped lightweight steel shroud and uniquely designed composite impeller delivers maximum air volume (CFM), velocity and pressure from the VS-1.2
  • Removable Battery
    Dependability is a must so we designed the best Lithium-Ion battery for the VS-1 blower. The battery is IP 65 rated, can be recharged in about 4 hours, and run on a complete charge for 70 minutes at full speed.
  • AVAILABLE SHORE POWER
    Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible
  • Only 52 lbs. with Battery
    The welded tubular aluminum frame design makes it easy to roll or lift. US Patent #.: US 11,333,291 B2 
  • Other Features
    -Variable Speed motor rated at IP65 -Thin-Vane air straightener grill and composite impeller -LED flow-path lighting positioned low for visibility below the smoke -Tapered lightweight steel shroud maximizes airflow performance -Ergonomic patent-pending frame design with transverse wheels -Small Footprint 22.88″W x 24.4″H x 11″D (Half the size of a gas blower) -Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics.

  Find A Dealer
  View Product
• 

  BB-16 Battery Blower with Removable Battery

  Powerful, Lightweight, & Self Contained.

  • MULTI-USE
    It can be used:

    • Indoor and outdoor: IP66
    • For PPV, alone or combined with other fans
    • For blowing or extraction through ducts
    • As a foam generator with adapter
    • for rehab of the crew after an intervention
  • SELF CONTAINED AND LIGHTWEIGHT
    Works on battery or plugged in 50 minutes of run-time on removable battery. Only 51 lbs.
  • Removable Lithium-Ion BATTERY
    Quick Charges within 3 hours.
  • AVAILABLE SHORE POWER
    Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible
  • CONVENIENT AND ERGONOMIC
    • Adjustable tilt from +65° to -90° with locking system (allows flat positioning to cover a manhole)
    • Integrated variable-speed drive
    • 10 LEDs to illuminate the walkway in front of the blower
    • Built-in charger: charge during operation
    • Battery charge indicator
    • Secure (flat) keypad to control all functions (no fragile button to turn for setting speed)
    • Low maintenance: 1 full charge every 6 weeks
    • Designed to be connected with ducts, foam adapter, and rehab misting device
    • Integrated variable-speed drive

  Find A Dealer
  View Product
• 

  BB-16H powered by HURST® Jaws of Life® E3™/EWXT™ Batteries

  Powerful, Lightweight, and Self-Contained.

  • MULTI-USE
    It can be used:

    • Indoor and outdoor: IP66
    • For PPV, alone or combined with other fans
    • For blowing or extraction through ducts
    • As a foam generator with adapter
    • for rehab of the crew after an intervention
  • SELF CONTAINED AND LIGHTWEIGHT
    Works on battery or plugged in 35 minutes of run-time with HURST Jaws of Life® E3™/EWXT™ Batteries.
  • Powered by 2 HURST Jaws of Life® E3™/EWXT™ Batteries.
    Quick Charges within 3 hours.
  • AVAILABLE SHORE POWER
    Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible
  • CONVENIENT AND ERGONOMIC
    Adjustable tilt from +65° to -90° with locking system (allows flat positioning to cover a manhole -Integrated variable-speed drive -10 LEDs to illuminate the walkway in front of the blower -Tapered lightweight steel shroud maximizes airflow performance -Ergonomic patent-pending frame design with transverse wheels -Battery charge indicator -Flat keypad to control all functions (no fragile button to turn for setting speed) -Designed to be connected with ducts, foam adapter, and rehab misting device

  Find A Dealer
  View Product
• 

  Variable-Speed Electric Power Blower (VSR)

  The VSR is the latest innovation in our variable speed electric delivers unmatched performance.

  • AIRFLEX COMPOSITION IMPELLER
    Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
  • WELDED STEEL ROLL CAGE FRAME
    Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
  • ERGONOMIC DESIGN
    Exclusive frame design makes it convenient to lift, carry and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research and experience to create the most ergonomic platform possible.
  • FOOT OPERATED TILT ADJUSTMENT
    No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°.
  • GFCI/NEMA 4 VARIABLE SPEED DRIVE
    The VSR positive pressure ventilation fan bears our latest variable speed drive. This GFCI compatible, NEMA 4 rated control box is durable, reliable and easy to operate. The 0 – 100 Rheostat knob and On/Off toggle are all it takes to operate the unit quickly and effectively.
  • PERFORMANCE 2.0 HP MOTOR
    You don’t always have to sacrifice performance for the convenience of an electric powered positive pressure ventilation fan. Our latest Power BlowerTM, the VSR, is closing the CFM gap between gas and electric. Equipped with a massive 2.0 HP motor, paired with our signature blade and shroud design, the VSR delivers the absolute best in GFCI compatible performance. If you’re looking to go electric but don’t want to sacrifice airflow, the VSR PPV fan is the answer.
  • 8″ NON-PNEUMATIC WHEELS
    Extra wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The PPV fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of the fan while in operation is eliminated. Risk of getting clothing in the positive pressure fan’s blades while kneeling to set brake levers is eliminated. 16″ models are only available with 6″ non-pneumatic tires.
  • TURBO 2000 SHROUD
    By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind.
  • FLIP-UP/FOLD-DOWN HANDLE
    The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.
  • DUAL “WINNING STEP”
    No levers to set or knobs to tighten when setting the angle for PPV. Foot operated adjustment is quick, easy and secure. Dual step allows for adjustment with either foot. Four back and one forward tilt position.
  • SAFETY GRILLE
    Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards.
  • INFORMATION/SAFETY BAR
    Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use.

  

  Find A Dealer
  View Product
• 

  Direct – Drive Gas Power Blower

  Direct-Drive Gas Blower offers the ideal combination of value, performance, and durability.

  • AIRFLEX COMPOSITION IMPELLER
    Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
  • WELDED STEEL ROLL CAGE FRAME
    Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
  • ERGONOMIC DESIGN
    The exclusive frame design makes it convenient to lift, carry, and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research, and experience to create the most ergonomic platform possible.
  • FOOT OPERATED TILT ADJUSTMENT
    No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°.
  • BEST IN CLASS GASOLINE ENGINES
    Our line of Direct-Drive positive pressure ventilation fans use only the best small engines the industry has to offer. All 16″ to 24″ PPV fans come available with your choice of either a Honda® GX Series or Briggs and Stratton® OHV engine. Both engines makes are known for their remarkable performance and unchallenged reliability. There’s no wrong choice between these two.
  • GASOLINE ENGINES – PPA
    Gasoline-powered fans offer the highest CFM performance available. Ranging anywhere from 4.8 to 8.5 HP, these positive pressure ventilation fans are recommended for the implementation of Positive Pressure Attack (PPA) in residential structures.
  • 8″ NON-PNEUMATIC WHEELS
    Extra-wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs, and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The positive pressure ventilation fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of blower while in operation is eliminated. The risk of getting clothing in PPV fan blades while kneeling to set brake levers is eliminated.
  • TURBO 2000 SHROUD
    By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind.
  • FLIP-UP/FOLD-DOWN HANDLE
    The exclusive full-width handle design makes pushing or pulling a positive pressure ventilation fan too and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.
  • DUAL “WINNING STEP”
    No levers to set or knobs to tighten when setting the angle for PPV. Foot-operated adjustment is quick, easy, and secure. The dual step allows for adjustment with either foot. Four back and one forward tilt position.
  • SAFETY GRILLE
    Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards.
  • INFORMATION/SAFETY BAR
    Features a large section of durable, reflective material to dramatically increase the visibility of the blower from the front view and a full list of instructions on the back to allow for safe and effective use.

  

  Find A Dealer
  View Product
• 

  Special – Operations Electric Power Blower

  Special Operations Power Blowers: the perfect choice to ventilate large, complex, and/or multi-story structures and stairwells.

  • LAMINAR AIRFLOW
    The Special Operations (SP) Power Blower™ uses a uniquely designed grill and shroud to produce a narrow, high-pressure air pattern called Laminar Air Flow. Fires in large, complex structures as well as multi-level structures build high back pressures inside the building. This high-pressure air pattern is capable of overcoming these back pressures resulting in uninhibited ventilation. This allows for a distanced set-back reducing fan noise heard inside the structure.
  • AIRFLEX COMPOSITION IMPELLER
    Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™ . Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
  • WELDED STEEL ROLL CAGE FRAME
    Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
  • FOOT OPERATED TILT ADJUSTMENT
    No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°.
  • GFCI COMPATIBLE VARIABLE-SPEED ELECTRIC
    The SPVS bears our latest variable speed drive. This GFCI compatible, NEMA 4 rated control box is durable, reliable, and easy to operate. The 0 – 100 rheostat knob and On/Off toggle is all it takes to operate the unit quickly and effectively.
  • PERFORMANCE 2.0 HP MOTOR
    Equipped with a massive 2.0 HP motor and paired with its signature blade and shroud design, the SPVS positive pressure ventilation fan delivers the absolute best in GFCI compatible performance.
  • EXTENDED SET BACK
    Cone Air Flow fan placement has always been 1.2 to 1.8 m from the doorway. The SP fan is most effective at a setback of 2.7 to 3.3 m using Laminar Air Flow, allowing improved personnel access. The new shroud and grille design allow high performance at this distance possible. SP units require at least a 7-foot set back to achieve effective positive pressure ventilation.
  • FLIP-UP/FOLD-DOWN HANDLE
    The exclusive full-width handle design makes pushing or pulling the positive pressure ventilation fan too and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.
  • SIX POSITION DUAL “WINNING STEP”
    No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°.
  • REAR WHEEL DESIGN
    The rear wheel design improves the positive pressure ventilation fan balance while it is rolling, keeping the shroud from touching the ground and making deployment easy across the snow, heavy mud, or rough, uneven terrain. This design also allows for rapid blower direction adjustment saving time and improving safety. Tempest blowers have no need for wheel brakes. This in turn removes the chance for forgetting to set/release the brakes.
  • INFORMATION/SAFETY BAR
    The Information/Safety Bar added to the folding handle features a large section of durable, reflective material to dramatically increase the visibility of the PPV fan from the front view and a full list of instructions to allow for safe and effective use.

  

  Find A Dealer
  View Product
• 

  Special – Operations Gas Power Blower

  Special Operations Power Blowers: the perfect choice to ventilate large, complex and/or multi-story structures and stairwells.

  • LAMINAR AIR FLOW
    The Special Operations (SP) Power Blower™ uses a uniquely designed grill and shroud to produce a narrow, high pressure air pattern called Laminar Air Flow. Fires in large, complex structures as well as multi-level structures build high back pressures inside the building. This high pressure air pattern is capable of overcoming these back pressures resulting in uninhibited ventilation. This allows for a distanced set-back reducing fan noise heard inside the structure.
  • AIRFLEX COMPOSITION IMPELLER
    Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
  • WELDED STEEL ROLL CAGE FRAME
    Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
  • FOOT OPERATED TILT ADJUSTMENT
    No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°.
  • HONDA® GX200 AND GX270 ENGINES
    The SP positive pressure ventilation fans are powered by the tried and true Honda® name. Using two of their most reliable small engines, the GX200 and GX270, paired with Tempest’s signature quality fan designs, these units are built to last. At 5.5 and 8.5 HP, the GX series motors are also equipped to deliver the performance and CFM you’d expect from the Tempest name.
  • EXTENDED SET BACK
    Cone Air Flow fan placement has always been 1.2 to 1.8 m from the doorway. The SP fan is most effective at a set-back of 8.86 to 10.8 m using Laminar Air Flow, allowing improved personnel access. The new shroud and grille design makes high performance at this distance possible. SP units require at least a 6.9 m set back to achieve effective positive pressure ventilation.
  • FLIP-UP/FOLD-DOWN HANDLE
    The exclusive full width handle design makes pushing or pulling a positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.
  • SIX POSITION DUAL “WINNING STEP”
    No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°.
  • REAR WHEEL DESIGN
    The rear wheel design improves the PPV fan balance while it is rolling, keeping the shroud from touching the ground and making deployment easy across snow, heavy mud or rough, uneven terrain. This design also allows for rapid blower direction adjustment saving time and improving safety. Tempest blowers have no need for wheel brakes. This in turn removes the chance for forgetting to set/release the brakes.
  • INFORMATION/SAFETY BAR
    Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use.

  

  Find A Dealer
  View Product
• 

  Ratchet Tie-Downs (Pair)

  Don't forget a pair of Ratchet Tie-Downs for your Tempest fan. Tie-Downs are used in attaching Smooth Bore Ducting and the Dust Collector in addition to aid in securing your Tempest during transportation. It's a simple addition with a number a uses.

  Key Features

  • Simple Design for Easy Operation
  • Allows Attachment of Ducting and Dust Collector
  • Secures Fan During Transport
  • 1" x 12' Each

  Find A Dealer
  View Product
• 

  Single – Speed Electric Power Blower

  Tempest Single-Speed PPV fans are perfect for departments looking to go electric on a limited budget.

  • AIRFLEX COMPOSITION IMPELLER
    Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
  • WELDED STEEL ROLL CAGE FRAME
    Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
  • ERGONOMIC DESIGN
    Exclusive frame design makes it convenient to lift, carry and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research and experience to create the most ergonomic platform possible.
  • FOOT OPERATED TILT ADJUSTMENT
    No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°.
  • GFCI COMPATIBLE SINGLE SPEED ELECTRIC
    The Single Speed’s 1.5 and 1.0 HP motors are extremely simple to operate with only a single switch used to turn the unit ON or OFF. All models are GFCI compatible and will run on any 15 amp circuit without tripping the breaker. Every Single Speed positive pressure ventilation fan provides impressive CFM capable of creating positive pressure ventilation.
  • EXPLOSION PROOF OPTION
    One of the benefits of a single speed electric motor is its ability to be readily built into an explosion proof housing. The Single Speed EP motor option is rated to operate safely in Class I, Groups C & D and Class II, Groups F & G environments. When dealing with potentially flammable environment, EP is a must. Optional explosion proof ON/OFF switch also available. 16″ Single Speed Explosion Proof Part No. 910-1201 18″ Single Speed Explosion Proof Part No. 910-1221 21″ Single Speed Explosion Proof Part No. 910-1241 24″ Single Speed Explosion Proof Part No. 910-1261 NOTE: Explosion Proof options do not affect Power Blower size or performance.
  • 8″ NON-PNEUMATIC WHEELS
    Extra wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The PPV fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of the fan while in operation is eliminated. Risk of getting clothing in the positive pressure fan’s blades while kneeling to set brake levers is eliminated. 16″ models are only available with 6″ non-pneumatic tires.
  • TURBO 2000 SHROUD
    By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind.
  • FLIP-UP/FOLD-DOWN HANDLE
    The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.
  • DUAL “WINNING STEP”
    No levers to set or knobs to tighten when setting the angle for PPV. Foot operated adjustment is quick, easy and secure. Dual step allows for adjustment with either foot. Four back and one forward tilt position.
  • SAFETY GRILLE
    Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards.
  • INFORMATION / SAFETY BAR
    Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use.

  

  Find A Dealer
  View Product
• 

  Smooth Bore Ducting

  Smooth Bore Ducting is our most cost efficient means to aid in hard to reach ventilation and dust/particulate removal. If you're looking to expand your ventilation reach, look no further.

  • Comes in four (4) Sizes:
    • 16"/18", Per Foot Part No. 725-004
    • 16"/18", 500 Feet Part No. 725-097
    • 21"/24", Per Foot Part No. 725-005
    • 21"/24", 500 Feet Part No. 725-063
  • Key Features
    • Increases Ventilation Reach and Access
    • Cost Efficient
    • Up to 500 Feet of Reach

  Find A Dealer
  View Product
• 

  Ducting Stabilizer

  Just as the name implies, this accessory stabilizes the loose end of your ducting to allow for efficient and effective air movement exactly where you need it. The stabilizer is a perfect addition with our Smooth Bore Ducting.

  • Comes in (2) Sizes:
    • 16"/18" Part No. 725-087
    • 21"/24" Part No. 725-008
  • Key Features
    • Easy Setup and Assembly
    • Solid, Welded Design
    • Secures and Stabilizers Smooth Bore Ducting

  Find A Dealer
  View Product
• 

  Variable-Speed Electric Power Blower (VSG)

  The VSG Power Blower™ is the perfect balance in electric driven performance, variable speed control and value.

  • AIRFLEX COMPOSITION IMPELLER
    Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
  • WELDED STEEL ROLL CAGE FRAME
    Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
  • ERGONOMIC DESIGN
    Exclusive frame design makes it convenient to lift, carry and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research and experience to create the most ergonomic platform possible.
  • FOOT OPERATED TILT ADJUSTMENT
    No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°.
  • GFCI/NEMA 4 VARIABLE SPEED DRIVE
    The VSG positive pressure ventilation fan is equipped with a time tested and proven variable speed drive. This GFCI compatible, NEMA 4 rated control box is durable, reliable and easy to operate. The 0 – 100 Rheostat knob and On/Off toggle are all it takes to operate this PPV fan quickly and effectively.
  • 8″ NON-PNEUMATIC WHEELS
    Extra wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The PPV fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of the fan while in operation is eliminated. Risk of getting clothing in the positive pressure fan’s blades while kneeling to set brake levers is eliminated. 16″ models are only available with 6″ non-pneumatic tires.
  • TURBO 2000 SHROUD
    By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind.
  • FLIP-UP/FOLD-DOWN HANDLE
    The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.
  • DUAL “WINNING STEP”
    No levers to set or knobs to tighten when setting the angle for PPV. Foot operated adjustment is quick, easy and secure. Dual step allows for adjustment with either foot. Four back and one forward tilt position.
  • SAFETY GRILLE
    Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards.
  • INFORMATION/SAFETY BAR
    Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use.

  

  Find A Dealer
  View Product