Gas Powered Blowers

The Tempest Gas Power Positive pressure ventilation Blowers/Fans use only the best small engines the industry has to offer. All of our Gas Powered PPV fans come available with your choice of either a Honda® GX Series or Briggs and Stratton® OHV engine. Both engine makes are known for their remarkable performance and unchallenged reliability. There’s no wrong choice between these two.

 

Know More

Gas Powered Fans and Blowers

Showing all 3 results

  • Direct - Drive Gas Power Firefighting Equipment Tempest Blowers

    Direct – Drive Gas Power Blower

    Direct-Drive Gas Blower offers the ideal combination of value, performance, and durability.
    • AIRFLEX COMPOSITION IMPELLER
      Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
    • WELDED STEEL ROLL CAGE FRAME
      Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
    • ERGONOMIC DESIGN
      The exclusive frame design makes it convenient to lift, carry, and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research, and experience to create the most ergonomic platform possible.
    • FOOT OPERATED TILT ADJUSTMENT
      No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°.
    • BEST IN CLASS GASOLINE ENGINES
      Our line of Direct-Drive positive pressure ventilation fans use only the best small engines the industry has to offer. All 16″ to 24″ PPV fans come available with your choice of either a Honda® GX Series or Briggs and Stratton® OHV engine. Both engines makes are known for their remarkable performance and unchallenged reliability. There’s no wrong choice between these two.
    • GASOLINE ENGINES – PPA
      Gasoline-powered fans offer the highest CFM performance available. Ranging anywhere from 4.8 to 8.5 HP, these positive pressure ventilation fans are recommended for the implementation of Positive Pressure Attack (PPA) in residential structures.
    • 8″ NON-PNEUMATIC WHEELS
      Extra-wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs, and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The positive pressure ventilation fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of blower while in operation is eliminated. The risk of getting clothing in PPV fan blades while kneeling to set brake levers is eliminated.
    • TURBO 2000 SHROUD
      By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind.
    • FLIP-UP/FOLD-DOWN HANDLE
      The exclusive full-width handle design makes pushing or pulling a positive pressure ventilation fan too and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.
    • DUAL “WINNING STEP”
      No levers to set or knobs to tighten when setting the angle for PPV. Foot-operated adjustment is quick, easy, and secure. The dual step allows for adjustment with either foot. Four back and one forward tilt position.
    • SAFETY GRILLE
      Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards.
    • INFORMATION/SAFETY BAR
      Features a large section of durable, reflective material to dramatically increase the visibility of the blower from the front view and a full list of instructions on the back to allow for safe and effective use.
    View Product
  • Special - Operations Gas Power Firefighting Equipment Tempest Blowers

    Special – Operations Gas Power Blower

    Special Operations Power Blowers: the perfect choice to ventilate large, complex and/or multi-story structures and stairwells.
    • LAMINAR AIR FLOW
      The Special Operations (SP) Power Blower™ uses a uniquely designed grill and shroud to produce a narrow, high pressure air pattern called Laminar Air Flow. Fires in large, complex structures as well as multi-level structures build high back pressures inside the building. This high pressure air pattern is capable of overcoming these back pressures resulting in uninhibited ventilation. This allows for a distanced set-back reducing fan noise heard inside the structure.
    • AIRFLEX COMPOSITION IMPELLER
      Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
    • WELDED STEEL ROLL CAGE FRAME
      Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
    • FOOT OPERATED TILT ADJUSTMENT
      No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°.
    • HONDA® GX200 AND GX270 ENGINES
      The SP positive pressure ventilation fans are powered by the tried and true Honda® name. Using two of their most reliable small engines, the GX200 and GX270, paired with Tempest’s signature quality fan designs, these units are built to last. At 5.5 and 8.5 HP, the GX series motors are also equipped to deliver the performance and CFM you’d expect from the Tempest name.
    • EXTENDED SET BACK
      Cone Air Flow fan placement has always been 1.2 to 1.8 m from the doorway. The SP fan is most effective at a set-back of 8.86 to 10.8 m using Laminar Air Flow, allowing improved personnel access. The new shroud and grille design makes high performance at this distance possible. SP units require at least a 6.9 m set back to achieve effective positive pressure ventilation.
    • FLIP-UP/FOLD-DOWN HANDLE
      The exclusive full width handle design makes pushing or pulling a positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.
    • SIX POSITION DUAL “WINNING STEP”
      No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°.
    • REAR WHEEL DESIGN
      The rear wheel design improves the PPV fan balance while it is rolling, keeping the shroud from touching the ground and making deployment easy across snow, heavy mud or rough, uneven terrain. This design also allows for rapid blower direction adjustment saving time and improving safety. Tempest blowers have no need for wheel brakes. This in turn removes the chance for forgetting to set/release the brakes.
    • INFORMATION/SAFETY BAR
      Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use.
    View Product
  • Belt - Drive Gas Power Firefighting Equipment Tempest Blowers

    Belt – Drive Gas Power Blower

    Tempest exclusive belt-drive design reduces engine wear, improves CFM performance, and provides greater stability.
    • AIRFLEX COMPOSITION IMPELLER
      Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
    • WELDED STEEL ROLL CAGE FRAME
      Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
    • ERGONOMIC DESIGN
      The exclusive frame design makes it convenient to lift, carry, and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research, and experience to create the most ergonomic platform possible.
    • FOOT OPERATED TILT ADJUSTMENT
      No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°
    • BELT DRIVEN
      The Tempest Belt-Drive positive pressure ventilation fans were designed with two major goals in mind. The first was to keep the engine at the lowest center of gravity as possible. Doing so greatly reduces the amount of vibration produced by the fan and guarantees it will not “walk”. Secondly, the belt/pulley system allows Tempest engineers to maximize the RPM’s at the blade, optimizing CFM output. The Belt-Drive has been categorized as the “Cadillac” of PPV fans.
    • GASOLINE ENGINES – PPA
      Gasoline-powered fans offer the highest CFM performance available. Ranging anywhere from 4.8 to 8.5 HP, these positive pressure ventilation fans are recommended for the implementation of Positive Pressure Attack (PPA) in residential structures.
    • 8″ NON-PNEUMATIC WHEELS
      Extra-wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs, and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The positive pressure ventilation fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of blower while in operation is eliminated. The risk of getting clothing in PPV fan blades while kneeling to set brake levers is eliminated.
    • TURBO 2000 SHROUD
      By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind.
    • DUAL “WINNING STEP”
      No levers to set or knobs to tighten when setting the angle for PPV. Foot-operated adjustment is quick, easy, and secure. The dual step allows for adjustment with either foot. Four back and one forward tilt position.
    • SAFETY GRILLE
      Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards.
    • INFORMATION/SAFETY BAR
      Features a large section of durable, reflective material to dramatically increase the visibility of the blower from the front view and a full list of instructions on the back to allow for safe and effective use.
    View Product